1. Manuals
  2. Brands
  3. Q-See Manuals
  4. Security Camera
  5. QSIPO26X
  6. Operation manual

Q-See QSIPO26X Operation Manual

Network speed dome
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Network Speed Dome Operating Manual

Advertisement

Table of Contents
loading

Related Manuals for Q-See QSIPO26X

Summary of Contents for Q-See QSIPO26X

  • Page 1 Network Speed Dome Operating Manual...

  • Page 2: Table Of Contents

    Welcome ... 1 Important Safeguards and Warnings ... 2 ... 3 1.1.1 Network Management ... 3 1.1.2 User Management... 3 1.1.3 Proportional Pan and Tilt ... 3 1.1.4 Preset ... 3 1.1.5 Auto Scan ... 3 1.1.6 Auto Touring ... 3 1.1.7 Auto Pattern ...
  • Page 3 ... 16 ... 16 4.4.1 Direction Setup ... 31 4.4.2 Preset ... 31 4.4.3 Scan ... 31 4.4.4 Tour ... 32 4.4.5 PATTERN ... 33 4.4.6 Pan Rotation ... 33 ... 34 ... 34 ... 34 5.2.1 Before login ... 35 5.2.2 After login ...
  • Page 4 5.3.4 PTZ Control ... 37 ... 39 5.4.1 Zoom ... 39 5.4.2 Focus ... 39 5.4.3 Iris ... 39 5.4.4 Preset ... 40 ... 40 ... 40 ... 41 ... 42 ... 44 6.1.1 Load and save configuration ... 44 6.1.2 General ...
  • Page 5 6.2.15 About ... 60...

  • Page 6: Welcome

    Welcome Thank you for purchasing our network speed dome system! This operating manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this speed dome features and functions. Before installation and operation please read the following safeguards and warnings carefully!

  • Page 7: Important Safeguards And Warnings

    Important Safeguards and Warnings E lectrical safety ． ． ． ． All installation and operation here should conform to your local electrical safety codes. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation. T ransportation security ．...

  • Page 8: Network Management

    1 1 1 1 Feature Features s s s and F Feature Feature and F and Function and F unction unction unctions s s s This series network speed dome has the following functions: 1.1.1 Network Management This series speed dome supports IE browser to realize network management. You can implement speed dome functions via IE.

  • Page 9: Day And Night Mode

    System can backup the concerning video to the central storage server via alarm or scheduled setting as you have set. You can record in local PC and backup the video to the client PC. 1.1.11 Day and Night Mode Auto/manual switches in low illumination .In auto mode camera will automatically adjust CCD light level.

  • Page 10: High Sensitive, High Resolution Integrated Digital Color Camera

    Delicate engine drive. Support 360 º continuous pan rotation. No blind area. Support 0.1º /s pan rotate while maintain image stability 180 º continuous tilt surveillance. 1.2.4 High Sensitive, High Resolution Integrated Digital Color Camera Auto focus Auto backlight compensation Auto light control Auto white balance Auto day/night mode...
  • Page 11 Power AC 24V/3A circuit) Core Consumption Heater Consumption Decode Card Build-in Network Video Build-in Server Engine stepper motor Preset Auto Cruise Auto Scan Auto Pattern Image Quality Six levels (Optional) Alarm Input/Output Video Display One-window display mode Signal Format PAL:625 TV Line, 50F/S NTSC:525 TV Line, 60F/S Resolution H D1...
  • Page 13 2 2 2 2 Network Speed Dome Installation Network Speed Dome Installation Network Speed Dome Installation Network Speed Dome Installation Before installation and operation, please read the following safety warnings carefully! All the installation here should be done by the qualified service engineer. All the operation here should conform to your local electrical safety code.
  • Page 14 We provide various installation brackets and installation ways for indoor and outdoor pendent network speed dome. — F B1 Wall mount bracket 1. Corner mount bracket DH-FW corner mount bracket×1 DH-FB wall mount bracket×1(Optional) Gasket×1 Other installation fittings 2. Pole mount bracket DH-FQ pole mount bracket ×1 We provide the following dimensions: Φ59~82mm...
  • Page 15 3. Wall surface mount bracket DH-FM wall surface mount bracket×1 DH-FB wall mount bracket×1 Gasket×1 Other installation kit 4. Pendant mount bracket DH-FD pendant fixed chassis×1 DH-FD200/500/800/1000 pendant bracket×1 2 00mm /500mm/800mm/1000mm （ DH-FD stud×1 Gasket×1 Other installation kit Step 1 Draw a circle in the surface and cut the circle out of the ceiling.
  • Page 16 Open the hinged door to the back box. Pull power cable, video cable, RS485 cable, network cable through cable feed out of the conduit fittings. Connect them with PCB board. Close the hinged door and screw the bolts. Pushing the back box into the installation hole (you just cut in step 1) by compressing the tab lock.
  • Page 17 Note: Please make sure the clips on both sides are firmly fixed. You can follow the tab on the outside cover to check. Step 4 Install lower dome. Match the two grooves of the lower dome with the two black tab locks. Insert one side while pressing the other side.
  • Page 18 a; Pull the power cable, video cable, RS485 and network cable through wall mount bracket hole. c; Pull the power cable, video cable, RS485 and network cable through back box feed through hole and reserve a considerable length. Stp2 Connect cables Connect power cable, video cable, RS485 and network cable with the PCB board.
  • Page 19 manufacturer, please insert these foams to protect the drive. b. Line up the red (A) and red (B) tabs with the red (A) and red (B) labels in the interior cover. Push in (B) side and then the other side. Continue pushing on the ends of the tabs until you hear a click noise.
  • Page 21 3 3 3 3 DH Network DH Network S S S S peed DH Network DH Network peed peed D D D D ome peed All the installation here should be done by the qualified service engineer. All the operation here should conform to local electrical safety code. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation.
  • Page 22 Please refer to professional service engineer for help if you need to open the cover for repair work. When you need to return network speed dome for repair job, please get the repair number first and ship the product to the factory in accordance with transportation safety code.
  • Page 23 2. DH-FW exterior corner bracket It works with wall mount bracket for corner installation. 3. DH-FB wall mount bracket fittings Step1 D ig holes in the wall － － － － Dig four holes in the wall in accordance with corner bracket holes and then insert φ expansion bolts into the hole (not supplied).
  • Page 24 Step 2 － － － － C orner bracket installation Connect power cable, video signal cable, control cable and network cable through the corner bracket hole. Insert corner bracket holes into the four expansion blots and use screw cap and gasket to fasten firmly. Wipe glass glue (not supplied) in the string hole to enhance waterproof capability.
  • Page 25 Step 4 Network Speed Dome installation Open the dome hinged box and connect cables into the dome. Please refer to chapter two for network speed dome installation. Please check all the following fittings are included in the package, contact your local retailer immediately if something is missing.
  • Page 26 3. DH-FB wall mount bracket fittings Step 1 Dig holes in the wall Dig four holes in the wall in accordance with corner mount bracket hole and insert φ expansion bolts (not supplied) into the hole. Step 2 Corner mount bracket installation Connect power cable, video signal cable, control cable and network cable through the corner bracket hole.
  • Page 27 Step 3 Fitting installation Screw four hex bolts through wall mount bracket and plastic gasket into wall surface mount bracket. (Between screw and bracket, please add a spring gasket). Fasten the wall bracket firmly mount the corner bracket. Note: when screw bolts, please fasten the spring gasket and then turn half a circle. In this way, you can fasten plastic gasket to get sound airproof ability and at the same time to avoid screw damage.
  • Page 28 Please check all the following fittings are included in the package, contact you local retailer immediately if something is missing. 1. DH-FB wall mount bracket It is suitable for indoor and outdoor pendant dome. It works with corner mount bracket, wall mount bracket and pole mount bracket.
  • Page 29 Step 1 Pole bracket combination Use slotted screwdriver to open three straps of the pole and connect them through the bracket holes. Step 2 Corner bracket installation Connect control cable, video cable, power cable and network cable through the bracket centre hole. Get the three straps to fasten the column object and screw the bolts firmly.
  • Page 30 Step 3 Spring Hex Bolts Step 4－ － － － Dome installation Step 4- Dome Installation Open the dome hinged box and connect cables into the dome. Please refer to chapter two for network speed dome installation. Please make sure all the following fittings are included in the package, contact you local retailer immediately if something is missing.
  • Page 31 2. DH-FD200/300/500 connection rod DH-FD200 length 200mm D H-FD300 length 300mm D H-FD500 length 500mm ； ； ， Pendant bracket should work with pendant fixed chassis. (Standard configuration) 3. DH-FD suspended bracket fittings Set screw Sealed rubber ring Sealed plastic pad Step 1 Dig four holes in the wall Draw four φ6 holes (not supplied) in the wall in accordance with holes of fixed chassis and then insert φ6 expansion bolts into the holes.
  • Page 32 Step 2 Pendant bracket connection chassis installation Connect control cable, video cable, power cable and network cable through the chassis centre hole. Fasten rubber pad on the suspended chassis. Insert the chassis four holes into expansion bolts and use screw cap and gasket to fix firmly. Wipe glass glue (not supplied) at the string holes to enhance waterproof ability.
  • Page 34 4 4 4 4 Network keyboard control dome Network keyboard control dome Network keyboard control dome Network keyboard control dome Note: all the operations here are based on DH-SD protocol. You can refer to Chapter eight for PELCO protocol operation. Connect dome A cable with Pin 3 or Pin 7 of Keyboard 485 interface.
  • Page 35 Enter dome menu Move cursor Move cursor down ON/OFF or select other function Enter menu Exit sub menu Exit dome menu Please refer to the following sheet for keyboard function. MENU SCAN AUTO-PAN PATTERN GOTO REMOVE TELE WIDE NEAR CLOSE OPEN WIPER LIGHT...

  • Page 36: Direction Setup

    4.4.1 Direction Setup 4.4.1.1 Speed It is to control direction. The value ranges from one to eight. Please use the number buttons of the keyboard to input value (between 0~8) and press ENTER to confirm. (Operation here is only active with key-press. You can use joystick to control directly.

  • Page 37: Tour

    、 U se left/right keys to highlight stop. Click ENTER to stop scanning. Note: for versatile scan and random scan, you need Corresponding protocols to support. 4.4.4 Tour 4.4.4.1 Tour setup Use up/down keys to highlight add to tour. Input value in tour group.

  • Page 38: Pattern

    • Thirdly, input 6 in tour point and click ENTER. You have deleted tour point 6. 4.4.5 PATTERN 4.4.5.1 Pattern setup • Move cursor to highlight pattern and then input pattern value. Input value is the pattern path you want to set (Maximally support five paths).
  • Page 39 5 5 5 5 Web client operation Web client operation Web client operation Web client operation Before web client operation, please check the following items: Network speed dome network connection is right DVR and PC network setup is right. Please refer to general-system setting- network setup Use order ping ***.***.***.***(* network dome IP address) to check connection is OK or not.

  • Page 40: Before Login

    5.2.1 Before login Before login, right click mouse, you can see an image is shown as in figure 5-3. 5.2.2 After login Click login the following image will pop up. See figure 5-4.Please input your user name and password. Note: Default account is: user name: admin: password: admin.

  • Page 41: Real-Time Surveillance

    When you are in surveillance mode, right click mouse the image is shown as in figure 5-6. You can see there added a new item: Pan-tilt control. Real time surveillance: choose the channel you want to implement real time monitor. Decode quality: there are totally four levels: general, good, better and best.

  • Page 42: Ptz Control

    2: Stop 3: Snapshot 4: Slow replay 5: Play 6: Pause 7: Fast play 8: Full screen 5.3.4 PTZ Control In figure 5-6, select pan-tilt control, the image is shown as in figure 5-8. Note: If you see some items such as preset protocol or speed protocol in grey color which you can not set, please apply your local network administrator for proper rights.
  • Page 43 （ ） A uto flip As long as you continue to hold the joystick in the down position, the dome rotates 180 degrees and repositions itself for uninterrupted viewing of any subjects that passes directly beneath the dome. （ ） 3 D auto location Working with DVR, click SIT button and then click one point in scene, current screen will be displayed in the central window.

  • Page 44: Zoom

    (7) Speed setup Network speed dome is to control direction operation. There are eight levels ranging from 1 to 8. Level 8 is the fastest speed. See figure 5-11. Here is for you to control network speed dome camera. 5.4.1 Zoom In figure 5-8, click buttons beside zoom to adjust focus.

  • Page 45: Preset

    Iris is to adjust camera image brightness. Click right button near iris screen becomes brighter while click left button near iris the screen becomes darker. You can use these two buttons to get ideal Iris is in auto mode after initialization, dome pan or tilt movement or zoom in, zoom out.
  • Page 46 Auto scan function allows camera to scan back and forth regularly in a horizontal field. Here you need to set left and right limit and scan speed. System support five scan route. 5-14 This series network speed dome can memorize user PTZ manual operation, focus zoom in/out, speed and etc.
  • Page 47 In figure 5-16, click Alarm PTZ button. You can see PTZ alarm setup interface. See figure 5-17.System supports two alarm input ports. You can refer the following sheet for assistant function. 5-16 5-17 There are three options: preset, auto scan and auto tour.
  • Page 48 Assistant Open button NO. Open Close backlight backlight compensation compensation Close Open Day/Night Day/Night mode mode Increase Decrease brightness brightness Display Hide preset name name Close Assistant Open button Open digital zoom Increase shutter time Open auto flip function preset Restore to factory default...

  • Page 49: Load And Save Configuration

    6 6 6 6 Other Functions in Web Other Functions in Web Menu ( Other Functions in Web Other Functions in Web In web menu, click configuration button the image is shown as in figure 6-1. There are totally seven function keys. 6.1.1 Load and save configuration 6.1.1.1 Save configuration Click save configuration button in figure 6-1.You can save current configuration to a...

  • Page 50: General

    6.1.1.2 Load configuration You can click load configuration button in figure 6-1 to load you previously backup file. See figure 6-3.Click Ok button and then select file of extension name .CFG. Now you have updated system setup. 6.1.2 General In figure 6-1, click general button. You can see an image is shown as in figure 6-4. Here is for you to input network information and select corresponding protocol.

  • Page 51: Scheduled

    6.1.3 Scheduled Click scheduled, the image is shown as below. See figure 6-5. Here is for you to set record information. There are three record modes: record, dynamic and alarm. You can draw a corresponding check box., Please click save button after all the setup. Note: All the video files here are saved in server;...

  • Page 52: Image

    6.1.4 Image In figure 6-1 click image button, the following dialogue box pops up. See figure 6-6. Here you can set image information and view network protocol. Click <save> below “time display” to save a configuration for one channel. After all the setup please click <save> in the bottom to save all settings. •...

  • Page 53: Motion Detection

    the last page. VBR: variable bit rate, no more than 1M. • Alarm when video lost ： loss occurred. Please draw a √ before channel number to activate this function. • Network Transport Protocol: Here you can review protocol of monitor and play back.

  • Page 54: Alarm

    You can click you mouse in the detection region to set motion detection area. The blue area is the motion detection zone. • Channel: here is for you to select channel number. • Delay time: system delays specified time you have set after alarm is cancelled. •...

  • Page 55: Video Setup

    • Mail Send ： Y ou can draw a √ in the check box to activate this function. When you finish all the setup here please clicks “save” in the bottom to save all configurations. 6.1.7 Video setup Here is for you to select hue, contrast, brightness and saturation for each channel (or all channels).

  • Page 56: Network Setup

    Network Setup 6.1.8 Click network button, the image is shown as in figure 6-10. 6.1.8.1 PPPoE Connection Set PPPOE as on, and then please input “PPPoE name” and “PPPoE password” you get from your ISP (Internet service provider). After saving it, you need to restart to active your configuration. After rebooting, network speed dome will connect to internet automatically.

  • Page 57: Main Menu

    In network DDNS, input your PPPoE name you get from you IPS and server IP (PC with DDNS ) . Click save and then reboot system. Click save button, system prompts for rebooting to get all setup activated. After rebooting, open IE and input as below: http / /(DDNS server IP)/(virtual directory name)/webtest.htm ：...

  • Page 58: Change Language

    6.2.2 Change language System can switch between simplified Chinese and English. System needs to reboot before modification becomes activated. 6.2.3 User manage Click user manage button, the image is shown as below. See figure 6-12. 6.2.3.1 Add user Click add user button, the image is shown as below. See figure 6-13. You can input corresponding new user information in current dialogue box.
  • Page 59 6.2.3.2 Modify user Modify user dialogue box is similar to Figure 6-13. You can modify user information and then click save button to return. 6.2.3.3 Delete user Click delete user button, system pops up the following dialogue box asking you to confirm.

  • Page 60: Record Control

    6-16 6.2.3.5 Delete group Click delete group button, system pops up dialogue box asking you to confirm. Click Ok to delete selected group. Note: you can only delete empty group (no user in the current group) 6.2.3.6 Modify group Click modify group, system pops up the dialogue box for you to modify rights setup. Please note when you delete one right for whole group, you need to make sure no user in current group has that right! 6.2.4 Record control...

  • Page 61: Date Time

    6-18 6.2.6 Date Time Here is for you to modify equipment time and date. See figure 6-19. Note: You need proper right to modify these items since time is very important factor in system. 6-19 6.2.7 System Information Here you can view current network speed dome running status. See figure 6-20.

  • Page 62: Alarm Prompt

    6-20 6.2.8 Alarm prompt Here you can select audio file and type. You can draw a before the check box. √ See figure 6-21. 6-21 6.2.9 Channel name Here is for you to modify channel name.

  • Page 63: Upgrade Bios

    System only supports maximally 8 Chinese characters or 16 English characters/numerals. 6.2.10 Upgrade BIOS Before upgrading, you can get upgrade file from our local engineer or download from our website. During upgrade process, power failure will terminate the whole upgrade process! In figure 6-23 click open file, select the directory and click send data button, system automatically begin upgrading BIOS.

  • Page 64: Record Directory

    6.2.11.1 Email server IP address In figure 6-24, select server IP and then click add button. System pops up the following dialogue box. See figure 6-25.You can input server network information here. 6.2.11.2 Receiver email address You can set one to three email addresses. System can send the email to you specified address (es).
  • Page 65 Here is for you to set privacy mask zone. Privacy mask zone is a four-sided section in the screen. You can drag this section to your desired location and resize its size. Draw a √ before the checkbox to activate this function. See figure 6-28. 6-28 6.2.15 About Here is for you to view version information, program version (BIOS version) and etc.

Table of Contents