FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Buttons On Receiver Mode switching Pairing Menu Auto Scan Right/CH2 Up/CH1 Manual Scan Down/Ch3: Left/CH4 4.10 SMA Antenna 4.11 Power LED Switch between quad mode and single channel mode Pairing the cameras and receiver OSD menu display Switching the channels automatically with set time interval Move to the Right / Switch to Channel 2 Move Up / Switch to Channel 1 Switching the channel manually...
Camera Installation Camera stand mounting screw (for ceiling mount) Power in cable (DC 5V input) Pairing button SMA antenna plug Camera stand mounting screw (for desk top mount) Microphone...
Menu Enter the Menu option to setup the main feature of this product. Through Right/Left button can adjust parameters, and through Up/Down button can select the features to set. Resolution (High / Low): When set to low, the image is not as clear, but it displays more frames per second.
Press the Pair the button on corresponding camera and wait for a while, the monitor connected to the receiver will display the images from the cameras that have been matched. Pairing succeeded. TV OUT: This option allows you to select the video format (NTSC/PAL) for video output resources.
10.6 Digital Peripheral Solutions does not accept responsibility for any illegal use of this product by the customer. Q-SEE PRODUCT WARRANTY Thank you for choosing our products. All of our product users have a conditional free warranty repair service for hardware within 12 months starting from the purchase date, and a free exchange service within one month (valid for manufacturing defects).
Page 12
DPS Inc. 8015 E. Crystal Dr Anaheim, CA 92807 Website: http://www.q-see.com Fax: 714-998-3509 The material in this document is the intellectual property of our company. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without our company’s prior written permission.
Page 13
2. We do not accept any responsibility for any harm caused by using our product. 3. The product picture may differ from the actual product, which is only for your reference. The accessories may be different in different selling areas. For details of accessories, please refer to your local distributor.