P/T Function Setting - Q-See QSLO2712 Manual

Hide thumbs

Table Of Contents

Table of Contents

● Frame scan T Setting:

Operating method as follows:

1、 Move cursor to choose 【

【OPEN】key (open iris order) for confirmation，enter into

"Frame scan T Setting Items."

2、 Use P/T up and down-ward order to change "Frame Scan T"

(3-120s available)

3、 Press 【 OPEN】 key (open iris order) to confirm saving the setting

and exit; Press 【 CLOSE】 key (close iris order) to confirm losing

the setting and exit;

● Frame scan TP Setting:

Operating method as follows:

1、Move cursor to choose【

. Press 【OPEN】 key (open iris order) for confirmation, enter into

"Frame Scan TP Setting items"

2、By running the dome, TP position will appears on the screen,

and after the adjusting the TP position required, press【OPEN】

key（open iris order）for confirmation,the system will save the

present TP position as the basic position while frame scan

3、Press【CLOSE】key（close iris order），there will be no frame

scan TP setting and return

Attention：

English

Frame scan T】

in the 【

Frame scan TP】

in the【

a、Frame Scan TP Setting can be set

ranging°0－90°freely；

b、 If the setting is not saved, wewill not

carry out frame scan function.