P/T Function Setting - Q-See QSLO2712 Manual

Hide thumbs

Table Of Contents

Table of Contents

Run Patrol 1:

●

Remarks：

All the Patrol running methods are the same, here we take "Run Patrol 1" as

an example to make illustration.

Operating method as follows:

1、 Move the cursor to choose 【

key (open iris order) for confirmation, enter into "Setup Patrol

Menu".

2、Move the cursor to choose 【

Press

【OPEN】key (open the irisorder) to confirm starting running

Patrol 1,at the same time , the dome will exit the main menu and

run Patrol 1 , the corresponding preset No. "

﹡" will display on the left-upward of the monitor screen.

3、In running patrols, the dome will stop the present scan upon receipt

of any effective order.

Remarks

：All the Patrol running methodsare the same, if

you want to rerun a new patrol, just repeat the

above steps.

English

Patrol】 in the

Pan

】 .

【

Run Patrol 1】

in the 【

Go to preset