P/T Function Setting - Q-See QSLO2712 Manual

■ Home Place Setting：
Operating method as follows:
1、Call preset 95 or 64 to enter into the main menu
2、 Move cursor to choose 【
【OPEN】key (open iris order) for confirmation，
will save the dome's present position as "Home Place".
3、Press【CLOSE】key (close the iris order), go back to the
up-menu.
Remarks：
"Home Place" is equal to A Special Preset in
function.
■ Auto Flip Setting：
Operating method as follows:
、
1 Call preset 95 or 64 to enter into the main menu.
、
2 Move cursor to choose 【
【OPEN】key (open iris order) for confirmation，
"
Auto Flip Function Setting
3、Use P/T up and down-ward order to change。Choose "On"
means "Open Auto Flip Function", can reach 180deg rotation
vertically. Choose "Off" means "Close Auto Flip Function",
can't reach 180deg rotation vertically.
4、 Press 【 OPEN】 key (open iris order) to confirm saving the setting
and exit; Press 【CLOSE】 key (close iris order) to confirm losing
the setting and exit;
English
Home place】 Pan
in the 【
Auto flip】 Pan
in the【
"

P/T Function Setting

P/T Function Setting
Pattern
Patrol
】 . Press
Scan
the system
Home place
Auto flip
Tilt Max speed 110
Pan Max speed 120
Preset speed
Home Place Setting
Pattern
Patrol
Scan
Home place
Auto flip
Tilt Max speed 110
Pan Max speed 120
Preset speed
P/T Function Setting Item
Pattern
Patrol
】. Press
Scan
enter into
Home place
Auto flip
Tilt Max speed 110
Pan Max speed 120
Preset speed
Auto Flip Function Setting
Pattern
Patrol
Scan
Home place
Auto flip
Tilt Max speed 110
Pan Max speed 120
Preset speed
On
124
On
124
On
124
On
124
65