P/T Function Setting - Q-See QSLO2712 Manual

P/T Function Setting

● Scan limit L Setting:
Operating method as follows:
1、Move cursor to choose【
【OPEN】 key (open iris order) for confirmation, enter nto "Scan
Limit L Setting item"；
2、By running the dome, TP position will appears on the screen,
and after the adjusting the Scan Limit L required, press
【OPEN】 key （ open iris order） for confirmation,the system will
save the present horizontal position as Limit L position while
scan
3、Press【CLOSE】key（close iris order） ，there will be no Scan
Limit L setting and return
Attention：
● scan limit R Setting:
Operating method as follows:
1、Move cursor to choose【
【OPEN】 key (open iris order) for confirmation, enter nto "Scan
Limit R Setting item"；
2、By running the dome, TP position will appears on the screen,
and after the adjusting the Scan Limit R required, press
【OPEN】 key （open iris order） for confirmation,the system will
save the present horizontal position as theLimit R while scan
3、 Press【CLOSE】key（close iris order） ，there will be no Scan
Limit R setting and return
Attention：
64
Scan limit L】
in the【
a、Scan Limit L can be set around
360°freely；
b、It is effective to both Auto Scan
Limit L and Frame Scan Limit L
Scan limit R】
in the【
a、Scan Limit R can be set around
360°freely.
b、It is effective to both Auto Scan
Limit R and Frame Scan Limit R
Scan Limit L Setting
Scan
】. Press Auto scan S
Auto scan TP
Frame scan S
Frame scan T
Frame scan TP
Scan limit L
Scan limit R
Auto scan S
Auto scan TP
Frame scan S
Frame scan T
Frame scan TP
Scan limit L
Scan limit R
Scan
】. Press Auto scan S
Auto scan TP
Frame scan S
Frame scan T
Frame scan TP
Scan limit L
Scan limit R
Auto scan S
Auto scan TP
Frame scan S
Frame scan T
Frame scan TP
Scan limit L
Scan limit R
060
060
005
060
060
005
P176 T45
Scan Limit R Setting
060
060
005
060
060
005
P300 T45
English