Moving Phrases (Phrase Move) - Roland VS-1680 Owner's Manual

Chapter 4 Editing a Recorded Performance (Track Editing)

Moving Phrases (Phrase Move)

This operation moves the specified phrase to
another location. This is convenient for cor-
recting timing mistakes that can occur when
recording performance data.
fig.04-47(ph_mv.eps)
A
B
* Phrases shorter than 0.5 seconds cannot be played back.
1. Hold down [SHIFT] and press [F2 (TRACK)].
2. Press [F1 (Tr/Ph)] so that Phrase Edit menu
appears in the display.
3. Press [F3 (Move)]. If "Move" does not appear in
[F3], first press [PAGE] until "Move" is displayed,
and then press [F3 (Move)].
4. Press [F1 (SelPh)].
5. Press the SELECT button for the channel contain-
ing the move source track.
The button indicator lights.
Alternatively, press [
move the cursor to the phrase you want to move, and
then press [F3 (MARK)] or [YES].
This moves the phrase containing the mark. When [F2
(ALL)] is pressed, you can place or remove the marks
on all phrases simultaneously.
fig.04-48(ph_mv_sel)
96
A'
TO Time
B'
TO Time
], [ ], [ ], and [
6. Press the STATUS button for the move destination
track.
The button indicator lights red.
Rotating the TIME/VALUE dial allows you to specify
the move destination V-track. For example, "1-1" indi-
cates "Track 1, V-track 1," and "9L-1" indicates "Track
9 (Stereo Track 9/10, left channel), V-track 1."
* Do not designate V-tracks that have already been specified
as move destinations for other phrases.
7. Repeat Steps 5 and 6 if you want to move several
phrases simultaneously.
8. Press [F1 (Back)].
9. Press [
cursor. Set each of the values.
fig.04-49(ph_mv_prm)
] to
FROM (From point)
Specifies the time of the move source phrase being
copied to the move destination. This time need not
include the time containing the phrase.
], [ ], [ ], and [ ] to move the