Recording Fader Operations (Realtime) - Roland VS-1680 Owner's Manual

Chapter 11 Other Convenient Functions
When the current time is included in an adja-
cent marker:
Press either [SCENE] and [PREVIOUS] or [SCENE]
and [NEXT], the gradation range will be specified in a
same range.
Marker 1 Current Time
Gradation Range
When the current time matches with a marker:
When you press [SCENE] and [PREVIOUS], the gra-
dation includes the preceding marker; pressing
[SCENE] and [NEXT] creates a gradation including the
following marker.
Current Time
Marker 1
Gradation Range
6. Press [AUTOMIX].
The button indicator light goes off.

Recording Fader Operations (Realtime)

With this method, time-based both channel fader and
master fader movement during play back song are
recorded to the marker directly. This method is
referred to as Realtime. This is convenient when, for
example, you want to freely adjust the volume levels
of individual tracks.
* The VS-1680 does not provide any PAN knobs.
If you wish to adjust the pan during play back continu-
ously, use the Snapshot and the Gradation together.
1. Move to the time location at which you wish to
record in Realtime.
2. Confirm that Auto Mix mode is on.
3. Select the channels which you want to record
using Auto Mix. While pressing [AUTOMIX], so
that the button indicators to blink, press the input
channel or track channel SELECT button or the
Master Block [EDIT] button.
158
fig.11-11(gra1.eps)
Marker 2
fig.11-12(gra2.eps)
Marker 2 Marker 3
Gradation Range
4. Hold down [SCENE] and press [REC].
The AUTOMIX indicator blinks, indicating that Auto
Mix Realtime recording is ready.
5. Press [FADER] to select the faders that will be in
effect with the input mixer or track mixer.
6. Adjust the top panel channel faders and master
fader to the desired positions.
* When the Fader Match (p. 185) in the System parameters
is set to "Null," and the current fader positions of do not
match the actual volume levels, if you don't first move the
channel faders to their actual values, you will be unable to
Time
record the data using Auto Mix.
7. Press [PLAY] to begin playback.
8. Operate the channel faders and master fader on
the top panel.
Auto mix data will be recorded only for those chan-
nels that are modified.
9. When the mix is finished, press [STOP].
markers will be automatically created in the area
which was played back.
If "!!! Lack of EVENT !!" Appears in the
Display
If you do a lot of recording or make numerous
edits using such functions as Track Copy, the
remaining number of events may fall below 1000.
Time
When this happens, you will not be able to con-
tinue recording Auto Mix data in real time. Please
refer to "About Events" (p. 22). In addition, when
planning to record for an extended period with
Auto Mix, please check the remaining number of
Events frequently, as described in "Checking the
Remaining Disk Space" (p. 186).