Writing Songs To Cd-R Discs - Roland VS-1680 Owner's Manual

Mixing:
The content of adjustments made to mixer settings
during playback are not recorded to the CD-R disc.
For example, in a normal performance, even if you
control fade-ins and fade-outs with the master fader,
this is not reflected in what is written to CD-R disc;
rather, it ends up sounding as if the song is cutting in
and out. Adjust equalizer, level, pan, and other set-
tings during track bouncing.
Setting up Auto Mix beforehand can make the track
bouncing operation simpler (p. 156).
Effects:
Effects that are operating during playback are not
recorded on CD-R discs. For example, in a normal per-
formance, even if you have reverb or delay applied to
the output of each track, this is not reflected in what is
written to CD-R disc; rather, it ends up sounding as if
no effect has been applied. Add effects during track
bouncing. (p. 78)
Track bouncing:
Two V-tracks, one as the left track and one as the right,
can be written to a CD-R disc. Bounce the tracks of
song data that has not been mixed down to two-chan-
nel stereo tracks (p. 77). Designate these tracks as the
master tracks (V-track write sources) to be written to
the CD-R disc when writing is to be carried out.
Range:
The two tracks designated by the VS-1680 for writing
to the CD-R disc are written from the beginning of the
tracks (normally "00h00m00s00") to the end (song
end). Thus, any blank space on the tracks before or
after the actual performance results in wasted space
on the CD-R disc. To avoid this, use Track Cut to
remove any unused portions on the tracks.
fig.07-03(trackcut.eps)
00h00m00s00
Blank Space Performance Data
Performance Data
Blank Space
Before Track Cutting
After Track Cutting
Time
Chapter 7 Use with a CD-R Drive

Writing Songs to CD-R Discs

1. Place a blank CD-R disc in the CD-R drive.
2. Press [PLAY (DISPLAY)].
3. Hold down [SHIFT] and press [F1 (SONG)].
The Song menu icon appears in the display.
4. Press [F3 (CD Wt)]. If "CD Wt" does not appear in
[F3], first press [PAGE] until "CD Wt" is dis-
played, then press [F3 (CD Wt)].
5. A confirmation message appears in the display.
Press [YES].
6. "STORE Current?" (Store the current song?)
appears in the display. If you wish to save the cur-
rent song and write it to the disc, press [YES]; if
not, press [NO].
7. Press [F1 (SelTr)].
fig.07-05(cdr_tr_sel.eps)
8. Select the left and right tracks on the CD-R disc to
which you want the song written. Use [
[ ], [ ], and [
to move the cursor to the V-track which you want
written as the left track, and press [F3 (Sel L)].
Continuing, move the cursor to the V-track which
you want written as the right track, and press [F4
(Sel R)].
9. Press [F1 (Back)].
],
] or the TIME/VALUE dial
121