Converting Vs-1680 Song Data For Use With The Vs-880 (Song Export) - Roland VS-1680 Owner's Manual

Chapter 10 Compatibility
Converting VS-1680 Song
Data for Use with the VS-
880 (Song Export)
You can convert the current song for use with
a VS-880 and copy it as a new songs to a Zip
drive connected to the VS-1680's SCSI connec-
tor. This is referred to as Song Export.
All song data, including mixer settings such as equal-
izer and Stereo Link, system settings such as sync
tracks and Tempo Maps, locate and mark points,
effects settings, and so on are copied.
Limits of Song Exported
Tracks: 1–8
1–8
V-tracks:
Locators: Bank 1–Bank 4
* You can create a song that has same both sample rate and
recording mode as source song. If the song whose record-
ing mode is set to "MTP" or "LIV2," Song Export can-
not be carried out. However, if there is insufficient free
space on the conversion destination drive, Song Export
cannot be carried out.
1. Make settings as shown below.
fig.10-04(connection.eps)
2. Select the song you want to convert as the current
song.
3. Insert a disk into the Zip drive.
4. Press [PLAY (DISPLAY)].
5. Hold down [SHIFT] and press [F1 (SONG)].
The Song menu icon is displayed.
150
6. Press [F5 (Exprt)]. If "Exprt" does not appear in
[F5], first press [PAGE] until "Exprt" is displayed,
and then press [F5 (Exprt)].
fig.10-04a(sg_exp.eps)
7. Press F4 (SelDr)].
A list of drives appears in the display. Press [
[ ], [ ], and [ ] to select the conversion desti-
nation drive (the Zip drive), rotate the TIME/VALUE
dial to select the conversion destination partition, then
press [F1 (Back)].
fig.10-05(sg_imp_dr.eps)
8. Press [F4 (Exec)].
A confirmation message appears in the display.
9. Press [YES].
"STORE Current?" (Store the current song?) appears
in the display.
10. If you wish to save the current song, press [YES];
if not, then press [NO]. If you have selected a
demo song, then press [NO].
11. After Song Export is completed, return to Play
condition.
],