Aux Jacks; Digital Out Connectors - Roland VS-1680 Owner's Manual

Chapter 11 Other Convenient Functions
3. Press [F2 (Mon)]. If "Mon" does not appear in
[F2], first press [PAGE] until "Mon" is displayed,
and then press [F2 (Mon)].
fig.11-44(mon.eps)
(Level)
This adjusts the volume level (0–127) for the MONI-
TOR jack. This is adjusted with the MONITOR knob
on the top panel.
(Balance)
This adjusts the left-right balance (L63–0–R63) for the
MONITOR jacks.
4. Press [PLAY (DISPLAY)]
Return to Play condition.

AUX Jacks

1. Press [MASTER].
The Master Block is displayed.
2. Press [F3 (AUX.A)]. If "AUX.A" does not appear
in [F3], first press [PAGE] until "AUX.A" is dis-
played, and then press [F3 (AUX.A)].
3. Determine what is to be output from the AUX
jacks by rotating the TIME/VALUE dial.
fig.11-45(aux.eps)
AUX A
This selects what sounds are heard through the AUX
A jacks.
EFX1: The sounds assigned to the (EFX1)
EFFECT bus.
EFX2: The sounds assigned to the (EFX2)
EFFECT bus.
176
Level
Balance
AUX1/EFX3: Sounds assigned to the AUX 1 bus. With
EFFECT B installed, the sounds are
those assigned to the (EFX3) EFFECT
bus.
AUX2/EFX4: Sounds assigned to the AUX2 bus. With
EFFECT B installed, the sounds are
those assigned to the (EFX4) EFFECT
bus.
AUX3/AUX: Sounds assigned to the AUX3 bus. With
EFFECT B installed, the sounds are
those assigned to the AUX bus.
4. Press [PLAY (DISPLAY)]
Return to Play condition.
* The AUX B jacks are set in the same way. Press [F4
(AUX.B)] at Step 2.

DIGITAL OUT Connectors

1. Press [MASTER].
The Master Block is displayed.
2. Press [F5 (DOUT1)]. If "DOUT1" does not appear
in [F5], first press [PAGE] until "DOUT1" is dis-
played, and then press [F5 (DOUT1)].
3. Determine what is to be output from the DIGI-
TAL OUT connectors by rotating the
TIME/VALUE dial.
fig.11-46(digi.eps)
DOUT1 (DIGITAL OUT1)
This selects what sounds are heard through the DIGI-
TAL OUT1 (coaxial) connector.
MST: Same sound as is heard from the MAS-
TER jacks (MIX bus).
MON: Same sound as is heard from the MON-
ITOR jacks.
The sounds assigned to the (EFX1)
EFX1:
EFFECT bus.
The sounds assigned to the (EFX2)
EFX2:
EFFECT bus.