Dividing Performance Data Into Two Parts (Song Split) - Roland VS-1680 Owner's Manual

Chapter 11 Other Convenient Functions
6. This sets you up to specify the next segment.
Press [ ], [ ], [
cursor. Repeat Step 5 to designate the following
segment in the same manner as the first.
You can arrange up to a maximum of 99 separate seg-
ments. At this time, the function buttons work as
shown below.
[F1 (NEW)]: Specify the next segment.
Clears the segment designation where
[F2 (Clr)]:
the cursor is positioned.
Deletes the segment where the cursor
[F3 (Del)]:
is positioned.
[F4 (Ins)]: Inserts a segment designation where
the cursor is positioned.
[F5 (Exec)]: Executes Song Arrange.
[F6 (EXIT)]: Exits the Song Arrange screen.
7. When all of the segments are in order, press [
to move the cursor to "Destination Time."
fig.11-34a(arrange2.eps)
8. Press [
] and [
TIME/VALUE dial to set the time location at
which the newly created Playlist is to begin.
At this time, the function buttons work as shown
below.
[F2 (NOW)]: Enters the current time where the cur-
sor is positioned.
[F3 (JUMP)]: Moves the current time where the cur-
sor is positioned.
[F4 (Arrg)]: Moves the cursor to "Arrange."
[F5 (Exec)]: Executes Song Arrange.
[F6 (EXIT)]: Exits the Song Arrange screen.
* If the time for the new Playlist to begin is set at a point
earlier than the previous song end, the original Playlist
(performance data) is overwritten. Additionally, if the
time for the new Playlist to begin is set after the last mark
point of the original song, a mark point is set at the begin-
ning of the new Playlist.
9. Press [F5 (Exec)].
172
], and [ ] to move the
] to move the cursor. Use the
10. A confirmation message appears in the display.
Press [YES]. If you wish to cancel the procedure,
then press [NO].
11. When Song Arrange is executed, return to Play
condition.
Dividing Performance Data
Into Two Parts (Song Split)
You can copy only certain tracks that you
have selected from all the V-tracks and create
on the current drive a new song that has only
those tracks copied onto it. This does not alter the cur-
rent song.
New songs take on all settings (markers, locators,
Auto Mix settings, Tempo Maps, sync tracks, system
]
settings, etc.) except for the performance data, and a
song name is automatically given with the last charac-
ter changed in the original song's name.
Song Split cannot be carried out if there is not suffi-
cient hard disk space. Furthermore, Song Split cannot
be undone using the Undo procedure.
1. Hold down [SHIFT] and press [F1 (SONG)].
The Song menu icon is displayed.
2. Press [F1 (Split)]. If "Split" does not appear in
[F1], first press [PAGE] until "Split" is displayed,
and then press [F1 (Split)].
3. Press [
], [
TIME/VALUE dial to move the cursor to the
track you want to copy, and press [F3 (MARK)] or
[YES].
The track containing the mark is copied.
fig.11-35(split.eps)
], [ ], and [ ] or rotate the