Download Print this page
Roland VS-2480 Frequently Asked Questions Manual
Roland VS-2480 Frequently Asked Questions Manual

Roland VS-2480 Frequently Asked Questions Manual

Vs-2480; vs-2480cd q and a
Hide thumbs Also See for VS-2480:

Advertisement

VS-2480/2480CD Q&A

BASIC FUNCTIONS

Q: What are the main differences
between VS-2480/2480CD and
VS-1880/1824?
A: Main differences from VS-1880/1824 are as follows.
• Accommodates 96kHz sampling rate
• 24-bit linear recording
• 2x R-BUS ports
• Newly developed pre-amp circuit on analog input
• Increased number of analog input jacks
• 17 motorized faders
• Mouse operation
• Information display function via VGA OUT
• SMPTE input
• Word clock input
• 3.5" hard disk drive installable with expanded partition
size to 10GB
• Dynamics processor (Compressor/Expander) equipped
on every mixer channel
• 4-band EQ
• Surround panning function
Q: About the Recording Mode
A:
• M24 (Mastering 24bit)
Audio from the analog inputs that passes through the
VS-2480/2480CD's 24-bit A/D converter, and audio data
from the 24-bit digital inputs will be recorded and
played as linear data.
When this mode is selected, the VS-2480/2480CD will
function as a 16-track recorder (tracks 1–16). When
sampling frequency is more than 64kHz, the
VS-2480/2480CD will function as a 8-track recorder.
• MTP (Multi Track Pro)
Audio from the analog inputs that passes through the
VS-2480/2480CD's 24-bit A/D converter, and audio data
from the 24-bit digital inputs will be recorded and
played using proprietary Roland coding technology
(R-DAC).
Normally you should select this mode.
• CDR (CD-R Writing):
This mode allows you to directly create a CD image file
on your hard disk – this file can later be burned onto a
CD-R. Recording and playback will occur using 16-bit
linear data similar to that of a CD player or DAT
recorder. In CDR mode, Tracks 1–8 are linked in
odd/even fader pairs, with their levels controlled by the
odd-numbered fader. Track 17–24 cannot be used.
• M16 (Mastering 16bit):
Recording and playback will occur using 16-bit linear
data similar to that of a CD player or DAT recorder.
When this mode is selected, the VS-2480/2480CD will
function as a 16-track recorder (tracks 1–16). When
sampling frequency is more than 64kHz, the
VS-2480/2480CD will function as a 8-track recorder.
• MT1 (Multi Track 1):
This recording mode provides approximately twice the
recording time of M16 mode.
• MT2 (Multi Track 2):
This recording mode provides even longer record times
than MT1.
• LIV (Live 1):
This mode is appropriate when your hard disk lacks free
space or when recording live performances where the
total recording time is unknown.
• LV2 (Live 2):
This mode provides the longest recording time. This
mode is appropriate for live recordings of speeches, and
recordings made for reference purposes. Use this mode if
you have very little drive space left or you aren't sure
how long the recording will be.
Q: Is it possible to mix down even
when all the 24 tracks are occupied?
A: Yes. In the Mastering Room, you can mix down to the
empty V-tracks on tracks 23/24 while playing back 24 tracks.
1

Advertisement

loading

Summary of Contents for Roland VS-2480

  • Page 1: Basic Functions

    VS-2480/2480CD and data similar to that of a CD player or DAT recorder. VS-1880/1824? When this mode is selected, the VS-2480/2480CD will A: Main differences from VS-1880/1824 are as follows. function as a 16-track recorder (tracks 1–16). When sampling frequency is more than 64kHz, the •...
  • Page 2 2,983 3,977 4,329 5,966 pad? 5,302 5,771 7,953 A: On VS-2480/2480CD, maximum length of every phrase is 6,362 6,925 9,543 7,955 8,658 11,932 limited within 24 hours. These phrases recorded and edited are assigned to the phrase pads, so the maximum length of...
  • Page 3: Mic Modeling

    A: No. Copyright bit is off when writing to CD-R. A: Insert connector is not equipped on VS-2480/2480CD but Q: Is it possible to use the audio CD it is possible to use the external effect processors. Please refer which is written on VS-2480/2480CD to the this manual “How to Record with External Effects...
  • Page 4: Scsi Devices

    A: If they accommodate with SCSI-2, they may work, but If you try to write another Project on CD-RW disc, it should Roland does not officially support them. DVD-RAM is not erase entire data existing on the disc. supported at this moment.
  • Page 5: Midi Devices

    MIDI? A: When master clock of VS-2480/2480CD is set to word A: Yes. You can control the VS-2480/2480CD mixer with clock, and two sources are completely synchronized with the external MIDI information (VS-2480/2480CD system version same word clock, they can be input simultaneously.
  • Page 6 VS-2480/2480CD Project on the model? computer? A: Only 3.5” hard disk can be installed in VS-2480/2480CD. A: No. It is impossible to use VS-2480/2480CD-formatted hard disk, Zip disk or CD-R/RW disc on the computer. Q: Is it possible to recover a DAT...
  • Page 7 7. Press [ ] to move the cursor to “TRACK DIRECT OUT.” 8. Rotate the TIME/VALUE dial to switch the setting to “ON.” The VS-2480/2480CD switches to Track Direct Out mode. 9. Press [ ] to move the cursor to “A.MULTI 1/2.”...
  • Page 8 VS-2480/2480CD Q&A and 16 are output from ANALOG MULTI OUTPUT 3, 4, The sounds on Tracks 9 and 10 are output from AUX A. 5, 6, 7, and 8, respectively. 13. Use the same process to assign “DIR 3/4” to “AUX B L/R.”...
  • Page 9 19. In the same way, assign Inputs 3, 4, 5, 6, 7, and 8 to Tracks 3, 4, 5, 6, 7, and 8, respectively. 20. Press [HOME (DISPLAY)]. The VS-2480/2480CD switches to Home condition. 21. Press [REC]. The VS-2480/2480CD enters recording standby mode. 22. Press [PLAY]. Recording begins. 23. Press [STOP]. Recording stops.

This manual is also suitable for:

Vs-2480cd