Connecting Performance Data (Song Combine) - Roland VS-1680 Owner's Manual

4. You can check the track name by pressing [F1
(SelTr)].
If you are going to set a mark at this time, the press [F1
(Back)].
fig.11-36(sel_tr.eps)
Setting Markers
When the cursor is moved to "Track," you can
have marks simultaneously set to or deleted from
all selected tracks. For example, if you move the
cursor to "Track 1" and press [F3 (MARK)],
marks are set in V-tracks 1–16 on Track 1.
By moving the cursor to "V-Track," you can then
simultaneously set marks on the same number V-
track on all the tracks. For example, if you move
the cursor to "V-Track 1" and press [F3 (MARK)],
marks are set on V-Track 1 of Tracks 1–16.
By pressing [F2 (ALL)], you can place and
remove marks from all of the tracks simultane-
ously.
5. Press [F4 (Exec)].
6. A confirmation message appears on the screen.
Press [YES]. If you wish to cancel the procedure,
then press [NO].
7. "STORE Current?" (Store the current song?)
appears in the display. If you wish to execute
Song Split after saving the current song, press
[YES]; if not, then press [NO].
8. When Song Split is executed, return to Play condi-
tion.
Chapter 11 Other Convenient Functions
Connecting Performance
Data (Song Combine)
All V-tracks from the other song on the cur-
rent drive are moved to the current song, and
that song is deleted. Any performance data
already existing in the current song is overwritten by
the performance data that is being move to the song.
When you don't want to make any changes to the
move source or move destination songs, first back up
the song using Song Copy or the DAT Backup proce-
dure.
You can perform Song Combine with any songs that
have the same sample rate and recording mode.
However, what is copied to the current song is perfor-
mance data (sound data) and the information that
designates the tracks to which that performance
data is recorded. Other settings such as those con-
cerning markers, locators, automix, tempo map, sync
track or system are lost.
1. First, select the song you want to be the move des-
tination as the current song.
2. Hold down [SHIFT] and press [F1 (SONG)].
3. Press [F2 (Combn)]. If "Combn" does not appear
in [F2], first press [PAGE] until "Combn" is dis-
played, and then press [F2 (Combn)].
fig.11-37(sg_cbn.eps)
4. Rotate the TIME/VALUE dial to move the cursor
to the move source songs and press [F3 (MARK)].
The songs with the marks are combined.
By pressing [F1 (SelSg)], you can have a list of the
songs displayed. At this time, rotate the
TIME/VALUE dial to select the song, and press [F1
(Back)].
fig.11-39(cb_sel_sg.eps)
173