Saving Song Data To A Dat Recorder (Backup) - Roland VS-1680 Owner's Manual

Saving Song Data to a DAT
Recorder (Backup)
Use the following procedure to back up the
song data on the current drive.
1. Connect the VS-1680 and the DAT recorder as
shown below.
fig.09-02a(datconnect)
Optical
Digtal In
DAT recorder
fig.09-02b(datconnect)
Chapter 9 Use with a DAT Recorder (DAT Backup)
Coaxial
2. Set the DAT recorder so that it is able to record
digital signals.
* Normally, the sample rate at which song data is transmit-
ted is set at 48 kHz. This sample rate has no relation to
the sample rate of the song data. If your DAT recorded
requires you to set the sample rate, set it to 48 kHz.
3. Hold down [SHIFT] and press [F6 (UTILITY)].
The Utility menu icon appears in the display.
4. Press [F6 (DATBk)]. If "DATBk" does not appear
in [F6], first press [PAGE] until "DATBk" is dis-
played, then press [F6 (DATBk)].
fig.09-03(dat_bk.eps)
Digital In
DAT recorder
141