Names Of Things And What They Do; Aes/Ebu Output Jacks; Clock-Source Switch; Clock-Source Indicator - Roland Digital Snake SO-AES4 Owner's Manual

Names of Things and What They Do

1
2
5
6
8
1

AES/EBU output jacks

These jacks are for output of digital audio conforming to the AES/EBU standard.
Use cables that meet AES/EBU standards.
2

Clock-source switch

This switches the word-clock source. The clock-source indicator displays the current
word-clock source.
3

Clock-source indicator

This indicates the current word-clock source.
Display
INT
EXT (W.CLK)
SRC
4

Sampling-frequency switch

This changes the sampling frequency when the clock source is SRC.
The current sampling frequency is displayed by the sampling-frequency indicator.
5

Sampling-frequency indicator

This indicates the current sampling frequency.
6

Word-clock input jack

This is a BNC connector for input of an external word clock. It supports sampling
frequencies up to a maximum of 96 kHz.
3
4
7
9
Description
S-4000S internal clock (fixed at 96 kHz)
Word clock input to the WORD CLK input jack (maximum 96 kHz)
SO-AES4 internal clock (switchable to 44.1 kHz, 48 kHz, or 96 kHz)
The SO-AES4 does not support
double-wire operation.
Changing clock source or
sampling frequency may cause
noise. To avoid the noise,
please use [MUTE ALL
OUTPUTS] button on the S-
4000S while changing clock
source or sampling frequency.
To change the switch setting,
use a blunt-tipped instrument
such as a ball-point pen,
mechanical pencil, etc.
A signal level of word-clock
source must be within 5Vp-p±
5%.
5