Synchronizing With Midi Devices; Esee Eene Eeeee Eene Enne Nnne Nnno Нане - Roland EF-303 Owner's Manual

Synchronizing with MIDI devices
Make settings and select a patch
Here we will explain basic connections for using the EF-303 to apply effects
to the output signal of an external MIDI device.
Use only the supplied AC adapter. Use of any other AC adapter may cause
malfunction.
SOURCE
SELECT
Move the switch to the LINE
position at the left.
Included AC adapter
(to an AC outlet)
М + OUTPUT
[SOURCE SELECT] switch: Since in this example we will be applying effects
to the output signal of the MIDI device, set the switch to "LINE."
| INPUT OUT
Turn on the power.
Adjust the level.
3 Select the 2-3 "SLICER PAN" patch.
BANK Nunber Nunber
[BANK] [PATCH]
Press the [BANK] button, then press the [2] button. This selects Bank 2. Next,
press the [3] button. This selects Patch No. 3 in BANK 2, "SLICER + PAN."
yov
Before making connections
to other devices, be sure to
turn down the volume of
all devices and then turn
off the power to prevent
malfunction or speaker
damage.
Turning the power on/off
(p.14)
"Adjusting the level (p. 15)
- What is a patch? (p. 43)
If the EF-303 is still in the
. factory-set state, Patch No.
"З of BANK 2 uses the
"SLICER + PAN" effect
algorithm.
21