Recording The Completed Song To Digital Recorder; Connecting Your Digital Recorder - Roland Sound Canvas Digital SC-D70 Owner's Manual

Recording the completed song to digital recorder

Here's how the song (audio data) that you completed in the preceding section can be
passed through the SC-D70 and recorded on a digital recorder such as an MD or
DAT.

Connecting your digital recorder

Connect your digital recorder (e.g., MD or DAT) to the SC-D70 as shown below.
fig.22-13.e
DIGITAL IN
Digital Recorder
When you make digital connections with a digital recorder, you must set the SC-
D70's sampling frequency to match the sampling frequency of the connected
recorder. After setting the sampling frequency select switch to the desired
sampling frequency, turn on the power of the SC-D70.
fig.22-14.e
DIGITAL IN
Stereo set
Sampling Frequency Select Switch
SC-D70
If the sampling frequency
of the output and input are
different, the audio quality
will be affected. In
addition, an excessive
burden will be placed on
the computer, possibly
causing its operation to
become unstable.
The sampling frequency
will not change if you
operate the sampling
frequency select switch
while the power of the SC-
D70 is turned on.
The sampling frequency for
MD is 44.1 kHz, and for
DAT is 48 kHz.
Recording
27