Lan Port Setting) - JRC JMA-9133-SA Instruction Manual

7.2.11

LAN Port Setting)

The system can receive data from other system via the JRC LAN. The purpose of
JRC-LAN is interoperation with other JRC systems. The JRC systems are
synchronized with datum in JRC-LAN network
NOTE: If the connection is not suggested from JRC office, don't connect PC or other
maker's system to JRC-LAN.
•
Connecting PC or other maker's system may cause a lower radar system performance.
•
Connecting PC or other maker's system may cause a lower that performance.
7.2.11.1 Transmission Setting (TX Setting)
For each sentence, turn on/off transmission.
Procedures
1) Open the Serviceman Menu.
2) Perfome the following menu open procedure to open the TX
Setting menu.
3) Set on/off for each sensor.
These sentences can be turned on/off.
Settable sentences
TTM(TT), TLL(TT), TTD(TT), TLB(TT), OSD, RSD, ALR, ACK, TTM(AIS), TLL(AIS),
TTD(AIS), TLB(AIS)
>
JMA-9100 Instruction Manual
To connect JRC-LAN, LAN cable and HUB (option) is
i
necessary. For details, contact the JRC offices.
2. Installation Menu
→ 9. Next
→ 5. LAN Port Setting
→
: The sentence is transmitted.
On
: The sentence is not transmitted.
Off
7－ 29
7.SETTINGS FOR SYSTEM OPERATION
1. TX Setting
>
7.2 SETTINGS
7