JRC JMA-9133-SA Instruction Manual page 214

>
JMA-9100 Instruction Manual 3.BASIC OPERATION
3.8.1.7 Fast Target Detection
• This function displays fast moving targets that are suppressed in scan-
correlative process mode.
•
This function is enabled when
5Scan CORREL
• If unwanted waves remain on the radar display, suppress them by using the
[SEA], [RAIN], or [GAIN] dial, or adjusting the interference rejection mode.
>
3.8 APPLIED OPERATIONS
3Scan CORREL
is selected as the video process mode.
: Disables the Fast Target Detection function.
Off
: Enables the Fast Target Detection function.
On
3－ 94
4Scan CORREL
, , or