Input Installation Information - JRC JMA-9133-SA Instruction Manual

2)-2. LMT Date
2)-3. LMT Time
2)-4. Time Zone
2)-5. Display Style
Set one of the following date display formats.
2)-6. Synchronize with GPS
A ZDA sentence sent by the GPS is used, thereby displaying time
synchronized with the GPS time.
7.2.8

Input Installation Information

The system can input installation information.
Procedures
1) Open the Serviceman Menu.
2) Perform the following menu open procedure to open the
Installation Information setting menu.
3) Input the installation information.
For the input method on the numeric value and character input screens, see Section 3.3.4
"Operation on Numeric Value, Latitude / Longitude and Character Input menu".
>
JMA-9100 Instruction Manual
Input the date in local time.
Input the date in local time.
Input the time-zone difference between the universal time and local time.
ex) 2007-12-31
YYYY -MM-DD
ex) DEC 31, 2007
MMM DD, YYYY
ex) 31 DEC, 2007
DD MMM , YYYY
i
Time synchronized with the GPS time
：
On
： Time not synchronized with the GPS time
Off
i. If On is selected for this item but a ZDA sentence is not input, the system
internal clock function is used to display the date and time.
Main
→ 1. Installation Information
Date Input the date of installed system.
Input the name of installation personel.
Name
Input the name of radar installer.
Company
7－ 21
7.SETTINGS FOR SYSTEM OPERATION
>
7.2 SETTINGS
7