Clear Waypoint/Route Data (Clear Wpt/Route Data) - JRC JMA-9133-SA Instruction Manual

>
JMA-9100 Instruction Manual 3.BASIC OPERATION
3.7.6.6 Updating Waypoint data (Waypoint Switch Mode)
Set how to update the Waypoint number when one Waypoint has been reached.
Procedures
1) Open the WPT/Route Operations menu by performing the menu
operation below.
2) Left-click the set value of the
select an operation mode.
3.7.7

Clear Waypoint/Route Data (Clear WPT/Route Data)

This function clears waypoint/route data from memory.
Procedures
Open the WPT/Route Operations menu by performing the menu
1)
operation below.
Left-click the
2)
Confirmation Window will appear.
3) Left-click the
A route data will be cleared.
>
3.7 USE ROUTE FUNCTION
Route
→ 3. WPT/Route Operations
: When next Waypoint has been reached, user updates the
Manual
following Waypoint.
: When next Waypoint has been reached, the following
AUTO
Waypoint is automatically updated.
Route
→ 3. WPT/Route Operations
6. Clear WPT/Route Data
button.
1. Yes
If data is not copied on the flash memory card (option),
NOTE:
the data is not be reloaded.
3－ 86
2. Waypoint Switch Mode
button.
item, and