Change Of Connection Pattern (With 3 Or More Display Units - JRC JMA-9133-SA Instruction Manual

A.2.4 Change of Connection Pattern (with 3 or More Display
Units)
If three or more display units are installed, the layout of connection patterns needs
to be set.
Procedures
1) Open the Inter Switch Menu (with 3 or More Display Units).
Move the cursor onto the display unit
2)
master" or Section c. "Display unit connected as slave")
click.
The selected display unit will be highlighted.
To deselect the display unit, left-click key again.
3) Move the cursor to the change-destination display unit, and left-
click.
he selected display unit in step 2 will be switched to the change-destination display unit, and
3. Set
If the change destination is empty, control will move and
Left-click the
4)
The connection pattern will be changed.
>
JMA-9100 Instruction Manual A.NQE-3141 Interswitch Unit
(Section f. "Set") will blink.
3. Set
A master display unit is always necessary for establishing a
i
slave connection.
A－ 7
>
A.2 INTERSWITCH OPERATION
(Section b. "Display unit connected as
to be changed , and left-
3. Set
button.
will blink.
A