Save Of Internal Memory Data (Card1/2) - JRC JMA-9133-SA Instruction Manual

JMA-9100 Instruction Manual
7.4.3

Save of Internal Memory Data (Card1/2)

The system can save internal memory data such as item settings in all menus onto
a flash memory card. If the radar processing circuit in the system has been
replaced, the set values before the circuit replacement can be restored by reading
the set values you saved before the replacement.
To save the internal memory data onto a flash memory card (option), the card
must be inserted in card slot beforehand.
7.4.3.1 Copying of Internal Settings onto Card (Internal To Card1/2)
Save the internal memory data, such as item settings in menus, onto a flash memory card.
The internal memory data should be saved at completion of system setting, and the operation
condition should be saved periodically.
Procedures
1) Open the Serviceman Menu.
2) Open the
3) Select
4) Select
The internal memory data is saved on the flash memory card.
7.4.3.2 Reading of Internal Settings from Card (Card1/2 To Internal)
Read the saved memory data from the flash memory card into the system memory.
Perform the read operation in order to return the system to the previous operation condition
after replacement of the radar processing circuit in the system.
Procedures
1) Open the Serviceman Menu.
2) Open the
3) Select
4) Select
The memory data is read from the flash memory card into the system memory.
After the internal memory area is updated, the system is restarted.
>
7.SETTINGS FOR SYSTEM OPERATION
.
3. Maintenance Menu
in the
3. Internal To Card1/2
Slot2
in the Confirmation Menu.
1. Yes
.
3. Maintenance Menu
in the
4. Card 1/2 To Internal
Slot2
in the Confirmation Menu.
1. Yes
7－ 41
>
7.4 MAINTENANCE MENU
.
.
7