Alarm Display - JRC JMA-9133-SA Instruction Manual

>
JMA-9100 Instruction Manual 5.OPERATION OF TARGET TRACKING AND AIS
5.5

ALARM DISPLAY

Critical alarm messages for Target Tracking (TT) and AIS functions:
Error message
CPA/TCPA
Alarm messages for Target Tracking (TT) and AIS functions:
Error message
CPA/TCPA
New Target
Lost
REF Target
95% Capacity
MAX Target
AIS 95% Capacity
AIS MAX Target
AIS ACT 95% Capacity The number of activated AIS targets by the AIS function has
AIS ACT MAX
AIS Alarm ***
AIS Alarm 001
AIS Alarm 002
AIS Alarm 003
AIS Alarm 004
AIS Alarm 005
AIS Alarm 006
AIS Alarm 008
AIS Alarm 025
AIS Alarm 026
AIS Alarm 029
AIS Alarm 030
AIS Alarm 032
AIS Alarm 035
Error message and alarm are displayed in the lower right of the display.
See also Section 9.1.1 "List of Alarms and other Indications".
>
5.5 ALARM DISPLAY
Description
There is a dangerous target. See also Section 5.5.1.
Description
There is a dangerous target.
A new target is acquired in the automatic acquisition zone.
There is a lost target.
The accuracy of the reference target may be decreased.
The number of targets being tracked by the Target Tracking
function has reached 95% of the maximum.
The number of targets being tracked by the Target Tracking
function has reached the maximum.
The number of displayed AIS target symbols has reached 95%
of the maximum.
The number of received data items exceeds the maximum
number of AIS target symbols that can be displayed.
reached 95% of the maximum.
The number of activated AIS targets by the AIS function has
reached the maximum.
Alarm information issued with the ALR sentence by the AIS.
*** is a 3-digit number which is Local Alarm No in the ALR
sentence. See below.
Tx malfunction
Antenna VSWR exceeds limit
Rx channel 1 malfunction
Rx channel 2 malfunction
Rx channel 70 malfunction
general failure
MKD connection lost
external EPFS lost
no sensor position in use
no valid SOG information
no valid COG information
Heading lost/invalid
no valid ROT information
5－ 40