Attaching The Smart Pen Tray - Smart Technologies Smart Board Plasma Display Installation Manual

Attaching the SMART Pen Tray

1. Insert the MOD4 connector into the mini RJ11 socket on the underside of the overlay.
Inserting the MOD4 Connector into the Overlay Socket
2. Place the Pen Tray bracket on the lower edge of the overlay frame. Using a Phillips No. 2
screwdriver, secure the Pen Tray bracket to the overlay with the two screws provided.
Screw x 2
Attaching the Pen Tray Bracket to the Overlay
Pen Tray Bracket
SBPD Installation Guide
MOD4 Cable
Lower Edge of
Overlay Frame
7