Optional Security Procedure; Equipping The Smart Pen Tray - Smart Technologies Smart Board Plasma Display Installation Manual

Optional Security Procedure

If you want to provide the interactive overlay with an additional level of security, install the four
security screws (located in the accessory box). Using the large hex key, screw a security screw
through the screw hole in the outer corner of each bracket, as shown in the figure below.
Security Screw x 4
Security Screw in Corner Mounting Bracket

Equipping the SMART Pen Tray

Insert the eraser end cup. Then place the eraser and four styluses in the Pen Tray.
Eraser
Black Stylus
Blue Stylus
Red Stylus
Green Stylus
Eraser End Cup
Equipping the Pen Tray
SBPD Installation Guide
13