CHECKING AND LUBRICATING THE CABLES / LUBRICATING THE
LEVERS AND PEDALS / LUBRICATING THE SIDESTAND/ LUBRICATING
THE CENTER STAND/ LUBRICATING THE REAR SUSPENSION
EB304200
CHECKING AND LUBRICATING THE
CABLES
The following procedure applies to all of the
cable sheaths and cables.
Damaged cable sheaths may cause the
cable to corrode and interfere with its
movement. Replace damaged cable
sheaths and cables as soon as possible.
1. Check:
S cable sheath
Damage ! Replace.
2. Check:
S cable operation
Unsmooth operation ! Lubricate.
Recommended lubricant
Engine oil or a suitable cable
lubricant
NOTE:
Hold the cable end upright and pour a few
drops of lubricant into the cable sheath or
use a suitable lubing device.
DB304210
LUBRICATING THE LEVERS AND PEDALS
Lubricate the pivoting point and metal-to-metal
moving parts parts of the levers and pedals.
Recommended lubricant
Lithium soap base grease
EB304220
LUBRICATING THE SIDESTAND
Lubricate the pivoting point and metal-to-metal
moving parts of the sidestand.
Recommended lubricant
Lithium soap base grease
LUBRICATING THE CENTER STAND
Lubricate the pivoting point and metal-to-metal
moving parts of the center stand.
Recommended lubricant
Lithium soap base grease
EB304240
LUBRICATING THE REAR SUSPENSION
Lubricate the pivoting point and metal-to-metal
moving parts of the rear suspension.
Recommended lubricant
Molybdenum disulfide grease
3-42
CHK
ADJ