Removing The Camshafts - Yamaha FZS600'98 Service Manual

2
CAMSHAFT
EB401102

REMOVING THE CAMSHAFTS

1. Remove:
S magneto cover
2. Align:
S "T" mark on the magneto rotor
(with the stationary pointer on the crank-
case)
a. Turn the crankshaft counterclockwise.
b. When piston #1 is at TDC on the com-
pression stroke, align the "T" mark a with
the stationary pointer b .
NOTE:
TDC on the compression stroke can be
found when the camshaft lobes are turned
away from each other.
3. Remove:
S timing chain guide (top side) 1
4. Loosen:
S camshaft sprocket bolts 2
5. Loosen:
S timing chain tensioner cap bolt 1
6. Remove:
S timing chain tensioner 2
7. Remove:
S timing chain guide (exhaust side) 1
S camshaft caps 2
NOTE:
For reference during installation, put identifi-
cation marks on each camshaft cap.
4-8
ENG