Checking And Replacing The Rear Wheel Sprocket; Installing The Rear Wheel - Yamaha FZS600'98 Service Manual

Table of Contents

Advertisement

REAR WHEEL, BRAKE DISC
AND REAR WHEEL SPROCKET
3. Measure:
EB701440
CHECKING AND REPLACING THE REAR
WHEEL SPROCKET
1. Check:
2. Replace:
EB701711

INSTALLING THE REAR WHEEL

1. Lubricate:
2. Tighten:
7-12
S rear wheel radial runout
S rear wheel lateral runout
Refer to "FRONT WHEEL AND BRAKE
DISC".
S rear wheel sprocket
More than 1/4 tooth a wear ! Replace
the rear wheel sprocket.
Bent teeth ! Replace the rear wheel
sprocket.
S correct b
S drive chain roller 1
S rear wheel sprocket 2
S rear wheel sprocket 1
a. Remove the self-locking nuts and the rear
wheel sprocket.
b. Clean the rear wheel drive hub with a
clean cloth, especially the surfaces that
contact the sprocket.
c. Install the new rear wheel sprocket.
Rear wheel sprocket
self-locking nut
60 Nm (6.0 mSkg)
NOTE:
Tighten the self-locking nuts 2 in stages
and in a crisscross pattern.
S wheel axle
S wheel bearings
S oil seal lips
Recommended lubricant
Lithium soap base grease
S wheel axle nut
S brake caliper bolts
Wheel axle nut
117 Nm (11.7 mSkg)
Brake caliper bolt
40 Nm (4.0 mSkg)
CHAS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents