Installing The Transmission - Yamaha FZS600'98 Service Manual

TRANSMISSION
EB413710

INSTALLING THE TRANSMISSION

1. Install:
S oil baffle plate 1
S crankcase breather hose 2
NOTE:
Insert the metal clamp 3 on the crankcase
breather hose into the slots 4 in the crank-
case.
2. Install:
S main axle assembly 1
S drive axle assembly 2
S oil seals
S circlips
S lock washer
NOTE:
S Make sure that the drive axle bearing cir-
clips 3 are inserted into the grooves 4 in
the upper crankcase.
S The main axle bearing pin 5 must face to-
wards the front of the crankcase and the
drive axle bearing pin 6 must face to-
wards the rear of the crankcase.
3. Check:
S transmission
Rough movement ! Repair.
NOTE:
Oil each gear, shaft, and bearing thoroughly.
4-73
ENG