General Tightening Torque Specifications - Yamaha FZS600'98 Service Manual

GENERAL TIGHTENING TORQUE SPECIFICATIONS

EB201000
GENERAL TIGHTENING TORQUE SPECIFICATIONS
This chart specifies tightening torques for standard fasteners with a standard ISO thread pitch. Tight-
ening torque specifications for special components or assemblies are provided for each chapter of this
manual. To avoid warpage, tighten multi-fastener assemblies in a crisscross pattern and progressive
stages until the specified tightening torque is reached. Unless otherwise specified, tightening torque
specifications require clean, dry threads. Components should be at room temperature.
A: Width across flats
B: Thread diameter
A B
(Nut) (Bolt)
(Nut) (Bolt)
10 mm 6 mm
12 mm 8 mm
14 mm 10 mm
17 mm 12 mm
19 mm 14 mm
22 mm 16 mm
2-17
SPEC
General tightening
torques
Nm mSkg
6 0.6
15 1.5
30 3.0
55 5.5
85 8.5
130 13.0