FRONT WHEEL AND BRAKE DISC
7-6
EB700722
INSTALLING THE FRONT WHEEL
1. Lubricate:
S wheel axle
S wheel bearings
S oil seal lips
Recommended lubricant
Lithium soap base grease
2. Install:
S Speed sensor unit
NOTE:
Make sure that the speed sensor unit and
the wheel hud are installed with the two pro-
jections a meshed into the two slots b re-
spectively.
3. Install:
S front wheel
NOTE:
Make sure that the slot a in the speed sen-
sor unit fits over the stopper on the outer
tube b .
4. Tighten:
S wheel axle
S wheel axle pinch bolt
S brake caliper bolts
Wheel axle
67 Nm (6.7 mSkg)
Wheel axle pinch bolt
20 Nm (2.0 mSkg)
Brake caliper bolt
40 Nm (4.0 mSkg)
Make sure that the brake cable is routed
properly.
CAUTION:
Before tightening the wheel axle nut,
push down hard on the handlebar sever-
al times and check if the front fork re-
bounds smoothly.
CHAS