Why Maintenance - Star Trac SPINNER 7240 Series Installation & Owner's Manual

W M
hy aintenance
A regular preventative maintenance schedule with all fitness equipment ensures that products are working at an optimal condition
without affecting the end user experience. To assist in the maintenance regiment; it is recommended to break service into: daily,
weekly, & monthly intervals. Details on each interval can be found in the "Maintenance Intervals" section of this document.
Tools
Working on this product will require basic and/or sometimes specialty tools based on the type of service that will be performed at any
time. To assist, Star Trac recommends having the tools listed (Fig. 1) available when performing maintenance.
Metric Allen (Hex Key) Wrench Set
Square Drive Ratchet Wrenches
Phillips Head Screwdriver Set
30 | SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER'S MANUAL
Tool
Crank Puller
Metric Sockets Set
Metric Open Wrench Set
Torque Wrench
Flat Head Screwdriver Set
Purpose
Removing cranks & pedals
Tightening or removing various Allen head screws
throughout the product.
Tightening or removing various hex nuts used
throughout the product.
Tightening or removing various hex nuts used
throughout the product.
To use in conjunction with Allen head and or hex
socket sets.
Tightening various critical bolts throughout the
product to specific torque specifications.
Tightening or removing various Phillips head
screws used throughout the product.
Prying off specific shrouds from wedged locations.
Fig. 1