Star Trac SPINNER 7240 Series Installation & Owner's Manual page 16

7.
Remove the foam packaging from the rear section of
the Spinner frame (Fig. 7).
8.
Locate the rear foot assembly along with the
corresponding hardware that secures it to the Spinner
frame (Fig. 8).
Hardware:
M8x1.25x30mm Hex Head Bolt
8mm Split Lock Washer
8mm Plain Washer
Threaded Two Hole Bar
9.
Insert the threaded bar (Fig. 9) into each slot at the
bottom section of the rear foot bracket.
16 | SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER'S MANUAL
Qty:
2
2
2
1
Fig. 7
Fig. 8
Fig. 9