Star Trac SPINNER 7240 Series Installation & Owner's Manual page 20

19.
Locate and mount the seat slider assembly onto the
seat post by relieving spring tension on the large knob
and pulling the small thumb pin located next to the
larger knob (Fig. 19).
20.
Locate and insert the handle bar post into the corresponding
location on the Spinner frame (Fig. 20) by pulling on the "T"
style pull pin located above the front SPIN
21.
Insert and drive the handle bar post to the lowest
possible position inside the Spinner frame (Fig. 21) by
pulling on the "T" style pull pin located above the front
SPIN badge.
20 | SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER'S MANUAL
®
badge.
Fig. 19
Fig. 20
Fig. 21