Star Trac SPINNER 7240 Series Installation & Owner's Manual page 21

22.
Locate the handle bar assembly and remove the button
head stop bolt that is pre-inserted into the slider section
(Fig. 22) using a 4mm hex key.
23.
Mount the handle bar to the front height adjustment
post (Fig. 23) by relieving spring tension on the large
knob and sliding the handle bar into place.
24.
Reinstall the stop bolt onto the handle bar slider
(Fig. 24) using a 4mm hex key.
SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER'S MANUAL |
Fig. 22
Fig. 23
Fig. 24
21