WARNING - to reduce the risk of injury to limit of: person: • 4-RB - 450 lbs. / 204 kg. 24 in (0.6 m) The safety and integrity of this machine can only be maintained when the equipment is regularly examined for damage and wear and repaired.
ASSEMBLY Assembly instructions cover either 10” touchscreen or LCD console. For 15” Embedded, please see the console manual 620-8816 for additional wiring and configuration information. Required Tools: • Metric Socket Set • Metric Allen Key Set • Torque Wrench • #2 Phillips Screwdriver •...
Page 8
5. Use a 4mm allen key to secure the M8 x 40mm set screw (740-4593) into the mast. Fig. 8 6. Set the seat assembly (720-5257-XX) onto the seat trolley assembly. Fig. 9 7. Use a 6mm allen key and four (4) pieces each of the 10mm ID x 20mm OD flat washer (120-3326) and M10 x 12mm button head cap screw (110-3231) to...
Page 9
8. Seat Adjustment: To adjust the seat, support your weight, then lift up on the seat adjustment lever and use your legs to position the seat into a comfortable position. Release the lever and ensure that the seat locks into the desired position.
Page 10
12. Use a #2 phillips screwdriver to secure the back shroud (701-0344-XX) to the rear panel (701-0345-XX) using four (4) of the #8-18 x 3/8” pan head screws (731-0584). Fig. 14 (Green/White) (Red/Black) Fig. 15 Wiring from Neck of Unit 13.
14. After connecting the console to the base, use a #2 phillips screwdriver to secure the console front to the rear shroud using six (6) of the 8-18 x 3/4” pan head screws. Fig. 17 15. Once the bike is fully assembled and is in its final position, adjust the rear leveling feet to ensure the bike is level and stable.
Use direction buttons to navigate. Press the button to enter Maintenance Mode. Fig. 20 Use the arrow keys to highlight MODEL then press Use the arrow keys to highlight 4-BIKE then press confirm the selection. Fig. 21 10” TOUCHSCREEN CONSOLE Touch the top left corner, then the center and then the top left corner again.
Page 13
Tap MODEL. Tap 4-BIKE Fig. 23 Installation is Complete. Page 12...
SUPPORT & SERVICE For Technical Support, Service, Parts Orders or any Customer Service needs, please contact us direct by phone, email, or through our 24 hour support site: GLOBAL SUPPORT CENTER 4400 NE 77th Avenue, Suite 300 Vancouver, WA 98662 Tel: (360) 326-4090 •...
Page 16
PART NUMBER 620-8734, REV B All rights reserved. Star Trac, the Star Trac logo and StairMaster are registered trademarks of Core Health & Fitness, LLC. Schwinn and Nautilus are registered trademarks of Nautilus Inc. used under license to Core Health & Fitness LLC. Throwdown is a registered trademark of Throwdown Industries, LLC.