Table of Contents
Advertisement
(12)
(13)
(14)
(14)
(14)
(12) 1 Screw (19).
(13) Remove the Transfer Ground Spring (649).
(14) 7 Gears.
Caution:
When re-installing the gear (labeled "6"), be sure to install the
washer on the shaft first.
Note:
Apply KS-660 Conductive Grease to the Transfer Ground
Spring (649) or to the end of the Feed Roller Shaft (618),
Page 45.
44
Advertisement
Table of Contents
Troubleshooting
