Fuser Roller (414), Pressure Roller (409), Eject Roller (422); Pressure Roller (409 Eject Roller (422) - Panasonic DX-2000 Service Manual

2.10. Fuser Roller (414), Pressure Roller (409), Eject Roller (422)

(2)
(8)
(3)
(5)
(4)
(6)
(9)
(7)
(1) Remove the Fuser Unit (431) (Refer to 2.9.).
(2) 2 Pressure Springs (412).
(3) 2 C-Rings (418).
(4) Remove the E24 Drive Gear (417).
(5) Remove 2 P17L6.8 Bushings (416).
(6) Remove the Fuser Roller (414).
Caution:
Do not scratch the surface of the Fuser Roller when
removing or re-installing it.
(7) Remove the E22 Gear (425).
(8) 1 Screw (4N).
(9) Remove the Lower Paper Guide (426).
41