Panasonic DX-2000 Service Manual page 198

No. Parameter (see Note 3)
081 DOC END FEED
082 JAM LENGTH
083 Not Used
084 LINE AS NO PAPER
085 Not Used
086 REDUCTION FINE
087 DARKER LEVEL
088 NORMAL LEVEL
089 LIGHTER LEVEL
090 Not Used
091
092 SMOOTHING
093 Not Used
~
109
110 MAC ADDRESS
111 LAN I/F ROM VER
112 INSERT EMAIL TXT
113 Not Used
114 SYMBOL SET
115 TIME ZONE
116 OVERWRITE WARNING
117 Not Used
~
132
133 COLLATION (PRT)
134 Not Used
135 JOB END TIMER
136 JAM RECOVERY
137 Not Used
~
159
160 VERSION
161 Not Used
~
199
Function Parameter Table
Selections
-5.0 mm
~
+5.0 mm
1 = 1 m
2 = 2 m
3 = 8 m
4 = Unlimited
1 = Ring (ring)
2 = Busy (keep line busy)
1 = Off
2 = On
0 = Lightest Contrast
~
15 = Darkest Contrast
1 = Off
2 = On
1 = Off
2 = On
1=Standard
2=Extended
1=SCROLL
2=DIRECT
1 = Yes
2 = No
1 = Off
2 = On
3 = Auto
1 sec.
~
999 sec.
1 = Off
2 = On
Indicates the ROM version on the FRM
PC Board.
198
Function
Adjusts the distance between the scanning sensor
OFF position and the scanning end position.
Selects the maximum length of the document that
can be scanned.
Selects whether to ring or send a busy tone to the
remote station when the recording paper runs out
or the unit cannot receive because of any trouble.
Selects whether the resolution is preset to Fine,
when sending with reduction B4→A4.
Selects the contrast level.
→15
0←
Lightest← →Darkest
Selects whether the smoothing function is
available.
Indicates the MAC Address.
Indicates the LAN I/F Firmware version.
Selects whether the Text Template (email
message) is programmable and added on all email
sent in the message body above the top line of text.
(Up to 40 characters Programmed in the User
Parameters.)
Selects whether the extended symbols other than
"%" is available for Internet Parameters entry.
Selects the setting method for Time Zone.
Scroll : Allows using <or> to scroll through the Time
Zone Table.
Direct : Allows you to input the Time Zone directly,
(*)key to be used as a switch between +/-.
Selects whether the Overwrite Warning is included
on the Internet FAX Result
programming the Auto Dialer via email.
Selects the Print Collation in Printer Interface
Mode.
When "Auto" is selected, print collation will operate
according to the setting in Fax Parameter #65.
Selects the Guard Timer while printing a data with
the Panafax Printing System ver. 5e/6.
Selects the JAM Recovery function in the PDL
Printer Interface Mode.
Off: Printing performance is faster, however if a
paper jam occurs the jammed pages will not
be reprinted automatically.
On: Printing performance is slower, however if a
paper jam occurs the jammed pages will be
reprinted automatically.
Receipt when