Installing Optional Feeder Unit - Panasonic DX-2000 Service Manual

9.3. Installing Optional Feeder Unit (UE-409057)
1. Contents
Qty.
1
1
2. Installation
Note: Install this Feeder Unit as the 2nd Feeder Unit only.
(1)
(2)
(5)
Description
250 Sheets Paper Cassette with Feeder Unit
Paper Size Label Set
(4)
(3)
(6)
Part No.
-
DZNK000298
(1) Turn the Power Switch to the OFF (O) position.
(2) Disconnect the Power Cord.
(3) Disconnect the Telephone Line Cable.
(4) Remove the Document Trays.
(5) Remove the Paper Cassette from the machine.
(6) Remove the Toner Cartridge from the machine.
(7) Remove the Paper Cassette from the Optional Feeder Unit.
(8) Remove the two Screws on the new Feeder Unit indicated
by the arrow marks. (These screws are used to attach the
Feeder Unit to the machine in step 12.)
(9) Place the machine on its right side on top of a clean cloth to
prevent damaging the Printer Cover.
(10) Plug-in the connector of the Feeder Unit.
(11) Hook the latches of the Feeder Unit into the holes and set
the Feeder Unit in the direction of the arrow.
(12) Secure the Feeder Unit with the screws removed in step 8.
316
Remarks