Panasonic DX-2000 Service Manual page 23

(13)
(11)
(15)
(17)
(10)
(12)
(14)
(16)
(10) Disconnect the Ribbon Cable Connector (CN7) on the
LANB PC Board.
Caution:
When re-installing the Ribbon Cable, ensure that the
connector with the larger Ferite Core is inserted into the LANB
PC Board (CN7).
(11) Disconnect Connector CN1 and CN2 on the LANB PC
Board.
(12) Remove 2 Screws (23).
(13) Remove the LANC PC Board (1101) and disconnect Con-
nector CN200 on the LANC PC Board.
(14) Remove 4 Screw (23).
(15) Remove the LANB PC Board (1102).
(16) Release the two PCB Spacers (146).
(17) Remove the FRM PC Board (1104).
23