Panasonic DX-2000 Service Manual page 285

No. Parameter
156 PRINT FORWARDED
DOCUMENT
157 TRANSACTION
JOURNAL
158 PC REMOTE
UPDATE
159 SUBJECT LINE ENTRY
160 DEFAULT DOMAIN
161 DNS SERVER
162 TIFF VIEWER URL
163 ROUTING HEADER
164 IFAX XMT HEADER
(Email only)
(see Note 1)
(see Note 2) (see Note 3)
Note: Note:
1. The standard settings are printed on the Fax Parameter List. To print out Fax Parameter List, see page 180.
2. The contents of Fax Parameter may differ depending on the each country
3. When this parameter (No. 147) is set to "Valid" (default), POP is selected as your email retrieval protocol. The G3
Fax Gateway function in this case is disabled since it requires SMTP.
Setting
Setting
Number
*1 Invalid Selecting whether a memory received fax or email to be forwarded
is always printed or only when forwarding is incomplete.
2 Valid
*1 Invalid Selecting whether the machine sends a transaction journal to the
pre-programmed email address.
2 Valid
Selecting whether the machine will accept commands from an
*1 Invalid
email application, to: (See page 46 to 62 of the User's Guide)
(a) Program the Internet Parameters
(b) Program the Auto Dialer
2 Valid
(c) Allow retrieval of the Journal
*1 Invalid Selecting whether the "Subject" line can be programmed during
each transmission.
2 Valid
1 Invalid Selecting whether the machine accepts to insert the Default
Domain (See page 41 of the User's Guide) when entering
*2 Valid
Manual Number Dialing.
1 Invalid Selecting whether to use the DNS Server for the Internet
communication.
*2 Valid
Selecting whether to include the URL address in the email
1 None
message body.
*2 English
English
3
+Japanese
*1 Invalid Selecting whether to add the Header Print information of the
Routing Station on the top edge of each routed pages.
2 Valid
Selecting whether to include the header when sending a document
to an addressee in the same Domain as specified in the Default
*1 Included
Domain parameter. (This is useful when using the machine to scan
documents back to your PC)
Note: When sending to a Domain other than as specified in the
2 Not included
312
Comments
Default Domain parameter, the header will be included
regardless of the selection.