Vision Fitness S70-02 Service Manual page 41

5.15 Pedal Arm Replacement – Continued
7) Remove the three bolts that hold the link arm to the pedal arm (Figures H & I).
FIGURE G
8) Remove the pedal arm (Figure J).
FIGURE I
9) Reverse Steps 1-8 to install a new pedal arm. NOTE: Torque the bolts removed in Steps 3 & 5 to 80 N-m.
10) Test the Elliptical for function as outlined in Section 5.22.
CHAPTER 5: PART REPLACEMENT GUIDE
FIGURE H
FIGURE J
41