Console Mast Replacement - Vision Fitness S70-02 Service Manual

CHAPTER 5: PART REPLACEMENT GUIDE

5.13 Console Mast Replacement

1) Remove the console as outlined in Section 5.10.
2) Remove the dual action handlebar as outlined in Section 5.12.
3) Pull the console boot up, and remove 3 screws of the right side console mast (Figure A) and another 3 screws from left side mast (Figure B).
FIGURE A FIGURE B
4) Pull the wires out the bottom of the console mast and remove the mast.
FIGURE C
5) When installing a new console mast, be sure to pull the console wires up through the new mast prior to installing the 5 screws into the frame.
6) Test the Elliptical for function as outlined in Section 5.22.
38