Incline Motor Replacement - Vision Fitness S70-02 Service Manual

CHAPTER 5: PART REPLACEMENT GUIDE

5.11 Incline Motor Replacement

1) Remove both shrouds from the machine as outlined in Section 5.1.
2) Remove the front and back console mast covers (Figure A).
3) Remove the 4 screws / nuts that connect the incline arms to the console mast (Figure B).
4) Remove the Cotter pins from both sides of the incline motor. (Figure C).
FIGURE A
FIGURE B FIGURE C
5) Disconnect the incline motor power cable (Figure D), and ground wire from the frame (Figure E).
FIGURE D FIGURE E
35