Drive Axle Replacement - Vision Fitness S70-02 Service Manual

CHAPTER 5: PART REPLACEMENT GUIDE
5.6 Drive Belt Replacement
1) Remove the shrouds as outlined in Section 5.1.
2) Loosen the belt tension bolt on the right side of the tension pulley and rotate the pulley counter-clockwise until there is enough slack in the belt to
remove it (Figures A & B).
FIGURE A FIGURE B
3) Install the replacement belt and reverse necessary steps to secure the assembly until the belt is tight. NOTE: Tighten the drive belt to 180 ft / lbs. The
idler bolt should be torqued to 80 N-m.
4) Test the Elliptical for function as outlined in Section 5.22.
27