A: Cable Box Or Satellite Receiver With A Video/Audio Output - Sony RDR-HX910 Operating Instructions Manual

A: Cable box or satellite receiver with a video/audio output

With this hookup, you can record any channel on the cable box or satellite receiver. Be sure that the
satellite receiver or cable box is turned on.
To watch cable or satellite programs, you need to match the channel on the recorder (L1 (line1) or L3
(line3)) to the input jack connected to the cable box or satellite receiver (LINE IN (line in) 1 or 3).
Audio/video cord
(not supplied)
to LINE IN (line in) 1 or 3
: Signal flow
b
Note
Do not connect a hi-definition tuner using the component video cords. This recorder only accepts standard definition
interlace signals.
z Hints
• If your cable box or satellite receiver has an S-video jack, you can use an S-video cord (not supplied) instead of the
audio/video cord.
• If you connect an S-video cord to the LINE IN (line in) 1 jack, set "Line1 Input" in "Video" setup to "S Video"
(page 96). If you connect an S-video cord to the LINE IN (line in) 3 jack, set "Line3 Input" in "Video" setup to
"S Video" (page 96).
Cable box/satellite receiver
COMPONENT
VIDEO OUT
AUDIO VIDEO
OUT OUT S VIDEO
R L
S-video cord
(not supplied)
LINE IN
R-AUDIO-L VIDEO S VIDEO
1
3
VHF/UHF DIGITAL COMPONENT
OUT VIDEO IN
IN
LINE IN
PCM/DTS/
DOLBY DIGITAL
Y
R-AUDIO-L VIDEO S VIDEO
COAXIAL
1 P
3
P
OUT
OPTICAL
ANT IN
TO TV
to antenna input
COMPONENT
VIDEO IN
Y
P
B
P
R
COMPONENT
VIDEO OUT
LINE OUT
Y
R-AUDIO-L VIDEO S VIDEO
1 P
B B
2
R P R
Wall
Antenna cable
(supplied)
TV
Component video cord
(not supplied)
to COMPONENT VIDEO IN
(component video in)
DVD (digital video
disc) recorder
~
AC IN
,continued
15