Timer Recording (Standard/Vcr Plus+ (Video Cassette Recording Plus)); Setting The Timer Manually (Standard); Dvd-R (Digital Video Disc-Recordable, Minus R) - Sony RDR-HX910 Operating Instructions Manual

Timer Recording (Standard/
VCR Plus+ (video cassette
recording plus))
* *
1
+ RW
HDD
*
6
- R
You can set the timer for a total of 30 programs, up
to one month in advance.
There are two methods to set the timer: the
standard method and VCR Plus+ (video cassette
recording plus) method.
• Standard: Set the date, time, and channel of the
program manually.
• VCR Plus+ (video cassette recording plus):
Enter the PlusCode (plus code) number
designated for each TV program (page 48).
b
Note
Do not operate your cable box or satellite receiver just
before or during a timer recording. This may prevent the
accurate recording of a program.
* 1 HDD (hard disc drive).
* 2 DVD+RW (digital video disc-rewritable, plus RW).
* 3 DVD-RW (VR mode) (digital video disc-rewritable,
minus RW (Video Recording mode)).
* 4 DVD-RW (Video mode) (digital video disc-
rewritable, minus RW (Video mode)).
* 5 DVD+R (digital video disc-recordable, plus R).
* 6

DVD-R (digital video disc-recordable, minus R).

46
* *
2 3 4
- RW - RW
VR
Video
Setting the timer manually
(Standard)
*
5
+ R
[TIMER]
(timer)
1
Press [TIMER] (timer).
Timer - Standard
Set the timer manually.
Date
Today
VCR Plus+
• If the "Timer – VCR Plus+" display appears,
press < to switch the display to
"Standard."
2
Select an item using </, and adjust
using M/m.
"Date": Sets the date.
The item changes as follows:
Today y Tomorrow y ...... y Thu 10/
28 (1 month later) y Sun (every Sunday)
y ...... y Sat (every Saturday) y
Mon-Fri (Monday to Friday) y Mon-Sat
(Monday to Saturday) y Sun-Sat (Sunday to
Saturday) y Today
"Start": Sets the start time.
"Stop": Sets the stop time.
1 2 3
4 5 6
7 8 9
0
</M/m/,,
ENTER
(enter)
TOOLS
(tools)
x REC STOP
(recording stop)
Start Stop CH Media Mode
: :
Update Off
OK
Cancel
Details